Straight pipe heater
In tubular heaters, insulating material pressed under high pressure into the tubular outer jacket keeps the resistance wire in the same position throughout.
They are easy to form and have excellent mechanical and electrical properties.
Its ends are terminated in the form of M4 threaded rods, which are insulated and positioned using ceramic sleeves. The M4 threaded rods can be connected with a - preferably heat-resistant - eyelet lug, or it is possible to spot weld a sliding lug or a M4 hole connection plate.
A cső átmérő: 6.5 és 8,5 mm. Ø 6.5 mm: l=300–2400 mm, Ø 8,5 mm: l=300–5000 mm.
Unheated length: between 40–60 mm.
Voltage: 24V, 42V, 110V, 230V, 400V.
The voltage, the length of the heater and the conditions of use determine the maximum power that can be installed.
The design complies with DIN VDE 0700 and CE regulations.
Surface load: 1–20 W/cm2.
Material grades used: 1.4541, 1.4571, 1.4404, 1.4876, 2.4858, 1.4529, 1.4828. Depending on the pipe material, the temperature range can vary between 20–800 °C.
For individual orders, we can also deliver the desired material quality in diameters other than those above (10, 12, 14, 16 mm), with individual unheated stem lengths (e.g. deep fryer) and operating voltages (480V).
Request a quote for your specific needs:I would like a quote.
Inpiro also offers accessories for tubular heaters: shouldered ceramic ring, threaded sleeve, and nut for the sleeve.
STANDARD_PRODUCTS
Narrowing
Typical material: stainless steel.
We also bend our stock based on your drawings and samples, and we produce bent tubular heaters for various applications with short lead times.
Application areas:
Heating of liquids, gases and solids. E.g. water heaters, steam generators, warmers, fryers, salamanders, saunas, tool heating, plastics industry equipment, plastic welders, injection molders.